Overmolding design guide, resin selectors, potting cost estimate and wire harness quote template.
Maintain this server? Claim it
Call this server's tools from your browser. Nothing to install.
Requests go through mcptry because browsers can't call most MCP servers directly. Header values are sent to the server for that request only and are never stored or logged.
Tool list from our last check. Connect live to refresh it.
Returns the real cost per working part of one year of in-house potting (epoxy or resin encapsulation), comparable with a quote: labour, engineering, rejects, returns, resin, curing space, equipment, health and safety, and delays. Same calculation as the calculator on www.fillio.ca; a missing argument takes the calculator's default value. Nothing is stored or sent.
Language of the answer: “fr” or “en”.
Weeks added to the project (wk)
Full value of one assembly ($)
Parts produced per year (parts)
Cost of one return ($)
Cure time (h)
Wasted or expired resin (%)
Amortized equipment and upkeep ($/yr)
Rejected parts (%)
Resin per part ($)
Value of a one-week delay ($)
Parts potted per day (parts)
Health and safety, waste, training ($/yr)
Loaded hourly rate, operator ($/h)
Annual cost of space ($/ft²)
Potting time per part (min)
Customer returns per year (returns)
Loaded hourly rate, engineering ($/h)
Engineering hours on potting (h/month)
Floor space per curing part (ft²)
Pick your client. Values in capitals, like YOUR_TOKEN, are yours to fill in.
Run in a terminal
claude mcp add --transport http overmolding https://innov.fillio.ca/mcp
Returns the real cost per working part of one year of in-house potting (epoxy or resin encapsulation), comparable with a quote: labour, engineering, rejects, returns, resin, curing space, equipment, health and safety, and delays. Same calculation as the calculator on www.fillio.ca; a missing argument takes the calculator's default value. Nothing is stored or sent.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
| weeks_added | number | Weeks added to the project (wk) |
| assembly_value | number | Full value of one assembly ($) |
| parts_per_year | number | Parts produced per year (parts) |
| cost_per_return | number | Cost of one return ($) |
| cure_time_hours | number | Cure time (h) |
| resin_wasted_pct | number | Wasted or expired resin (%) |
| equipment_per_year | number | Amortized equipment and upkeep ($/yr) |
| rejected_parts_pct | number | Rejected parts (%) |
| resin_cost_per_part | number | Resin per part ($) |
| delay_value_per_week | number | Value of a one-week delay ($) |
| parts_potted_per_day | number | Parts potted per day (parts) |
| health_safety_per_year | number | Health and safety, waste, training ($/yr) |
| operator_rate_per_hour | number | Loaded hourly rate, operator ($/h) |
| space_cost_per_ft2_year | number | Annual cost of space ($/ft²) |
| potting_minutes_per_part | number | Potting time per part (min) |
| customer_returns_per_year | number | Customer returns per year (returns) |
| engineering_rate_per_hour | number | Loaded hourly rate, engineering ($/h) |
| engineering_hours_per_month | number | Engineering hours on potting (h/month) |
| floor_space_per_curing_part_ft2 | number | Floor space per curing part (ft²) |
{
"type": "object",
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
},
"weeks_added": {
"type": "number",
"default": 0,
"minimum": 0,
"description": "Weeks added to the project (wk)"
},
"assembly_value": {
"type": "number",
"default": 60,
"minimum": 0,
"description": "Full value of one assembly ($)"
},
"parts_per_year": {
"type": "number",
"default": 500,
"minimum": 0,
"description": "Parts produced per year (parts)"
},
"cost_per_return": {
"type": "number",
"default": 250,
"minimum": 0,
"description": "Cost of one return ($)"
},
"cure_time_hours": {
"type": "number",
"default": 24,
"minimum": 0,
"description": "Cure time (h)"
},
"resin_wasted_pct": {
"type": "number",
"default": 25,
"minimum": 0,
"description": "Wasted or expired resin (%)"
},
"equipment_per_year": {
"type": "number",
"default": 1500,
"minimum": 0,
"description": "Amortized equipment and upkeep ($/yr)"
},
"rejected_parts_pct": {
"type": "number",
"default": 8,
"minimum": 0,
"description": "Rejected parts (%)"
},
"resin_cost_per_part": {
"type": "number",
"default": 2.5,
"minimum": 0,
"description": "Resin per part ($)"
},
"delay_value_per_week": {
"type": "number",
"default": 2000,
"minimum": 0,
"description": "Value of a one-week delay ($)"
},
"parts_potted_per_day": {
"type": "number",
"default": 20,
"minimum": 0,
"description": "Parts potted per day (parts)"
},
"health_safety_per_year": {
"type": "number",
"default": 800,
"minimum": 0,
"description": "Health and safety, waste, training ($/yr)"
},
"operator_rate_per_hour": {
"type": "number",
"default": 45,
"minimum": 0,
"description": "Loaded hourly rate, operator ($/h)"
},
"space_cost_per_ft2_year": {
"type": "number",
"default": 15,
"minimum": 0,
"description": "Annual cost of space ($/ft²)"
},
"potting_minutes_per_part": {
"type": "number",
"default": 12,
"minimum": 0,
"description": "Potting time per part (min)"
},
"customer_returns_per_year": {
"type": "number",
"default": 5,
"minimum": 0,
"description": "Customer returns per year (returns)"
},
"engineering_rate_per_hour": {
"type": "number",
"default": 95,
"minimum": 0,
"description": "Loaded hourly rate, engineering ($/h)"
},
"engineering_hours_per_month": {
"type": "number",
"default": 4,
"minimum": 0,
"description": "Engineering hours on potting (h/month)"
},
"floor_space_per_curing_part_ft2": {
"type": "number",
"default": 0.5,
"minimum": 0,
"description": "Floor space per curing part (ft²)"
}
},
"additionalProperties": false
}Returns as data what Fillio makes, the resins, the design values to aim for (size, resin volume and thickness, cables, draft), the accepted file formats and the body names it recognizes. Values are read from the analysis rules currently in force.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
{
"type": "object",
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
}
},
"additionalProperties": false
}Returns Fillio's design reference for low-pressure overmolding of electronics (boards, connectors, cable junctions): when the process fits, resins, values to aim for, 3D file preparation, what the portal's analysis checks. Useful when designing or reviewing a part to be overmolded.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
{
"type": "object",
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
}
},
"additionalProperties": false
}Returns the address of Fillio's portal, where the user uploads a 3D file, gets the feasibility analysis and requests a quote, with the steps and what to have at hand. Read-only: nothing is created or sent.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
{
"type": "object",
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
}
},
"additionalProperties": false
}Returns the SLA 3D printing resin best suited to a part's use, behaviour, service temperature and requirements, with its properties, the reasons for the choice, what remains to confirm and another option. Same choices and same answer as the selector on www.fillio.ca.
| Argument | Type | Description |
|---|---|---|
| use | string | |
| lang | string | Language of the answer: “fr” or “en”. |
| behavior | string | |
| requirements | array | |
| max_service_temp | string |
{
"type": "object",
"properties": {
"use": {
"enum": [
"functional_prototype",
"shop_jig_or_fixture",
"mold_or_hot_tooling",
"end_use_part_small_batch",
"seal_bumper_or_grip"
],
"type": "string",
"default": "functional_prototype"
},
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
},
"behavior": {
"enum": [
"rigid_and_precise",
"withstand_impacts",
"bend_without_breaking",
"flexible_80a",
"very_soft_40a_to_50a"
],
"type": "string",
"default": "rigid_and_precise"
},
"requirements": {
"type": "array",
"items": {
"enum": [
"maximum_stiffness",
"flame_retardant_ul94_v0",
"static_dissipative_esd"
],
"type": "string"
}
},
"max_service_temp": {
"enum": [
"room_temperature",
"up_to_60c",
"up_to_100c",
"above_100c"
],
"type": "string",
"default": "room_temperature"
}
},
"additionalProperties": false
}Returns the low-pressure overmolding polyamide family best suited to a part's service temperatures, exposures, hardness and needs, with its service range, hardness, colours, what remains to confirm with Fillio and another compatible family. Same choices and same answer as the selector on www.fillio.ca.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
| needs | array | |
| hardness | string | |
| exposures | array | |
| max_service_temp_c | integer | |
| min_service_temp_c | integer |
{
"type": "object",
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
},
"needs": {
"type": "array",
"items": {
"enum": [
"led_window",
"cable_strain_relief",
"difficult_substrate"
],
"type": "string"
}
},
"hardness": {
"enum": [
"any",
"soft",
"firm",
"rigid"
],
"type": "string",
"default": "any"
},
"exposures": {
"type": "array",
"items": {
"enum": [
"normal",
"uv",
"solvents",
"oils",
"humidity",
"abrasion"
],
"type": "string"
}
},
"max_service_temp_c": {
"enum": [
80,
105,
125,
175,
200
],
"type": "integer",
"default": 125
},
"min_service_temp_c": {
"enum": [
-40,
-25,
10
],
"type": "integer",
"default": -40
}
},
"additionalProperties": false
}Returns a check of a wire harness connection list (unknown references, contacts beyond the number of positions, duplicate contacts or wires, connectors with no wire or no length) and what the project still needs for a quote, and emails Fillio's Excel quote request template, filled in with the project, connectors, connections (from-to) and lengths, to the given address. The file goes to that address only; Fillio is notified (address, company, part). Useful when preparing a wire harness assembly quote request.
| Argument | Type | Description |
|---|---|---|
| lang | string | Language of the answer: “fr” or “en”. |
| email* | string | Email address that receives the filled-in file (that of the person requesting the quote). |
| lengths | array | Lengths: one row per branch, between its two ends (reference or junction), with the length and tolerance in millimetres. |
| project | object | Project: company, part, quantities, target date, who supplies the components, overmolding of a junction; every field is optional. |
| connectors | array | Connectors: one row per end of the harness (ref. J1, J2…), with the manufacturer, housing and contact part numbers and number of positions. |
| connections | array | Connections (from-to): one row per wire, from one reference and contact to another, with the gauge, colour and wire type. |
We read every tool's name, description and inputs the way the model will, looking for instructions hidden from you. A clean result means no warning signs, not a guarantee. Scanned Nov 19, 2026.
{
"type": "object",
"required": [
"email"
],
"properties": {
"lang": {
"enum": [
"fr",
"en"
],
"type": "string",
"description": "Language of the answer: “fr” or “en”."
},
"email": {
"type": "string",
"format": "email",
"maxLength": 254,
"description": "Email address that receives the filled-in file (that of the person requesting the quote)."
},
"lengths": {
"type": "array",
"items": {
"type": "object",
"properties": {
"to": {
"type": "string",
"maxLength": 200,
"description": "To"
},
"from": {
"type": "string",
"maxLength": 200,
"description": "From"
},
"label": {
"type": "string",
"maxLength": 200,
"description": "Label to print"
},
"notes": {
"type": "string",
"maxLength": 200,
"description": "Notes"
},
"branch": {
"type": "string",
"maxLength": 200,
"description": "Branch"
},
"sleeving": {
"type": "string",
"maxLength": 200,
"description": "Sleeving or protection"
},
"length_mm": {
"type": "number",
"minimum": 0,
"description": "Length (mm)"
},
"tolerance_mm": {
"type": "number",
"minimum": 0,
"description": "Tolerance (± mm)"
}
},
"additionalProperties": false
},
"maxItems": 100,
"description": "Lengths: one row per branch, between its two ends (reference or junction), with the length and tolerance in millimetres."
},
"project": {
"type": "object",
"properties": {
"part": {
"type": "string",
"maxLength": 200,
"description": "Part name or number"
},
"company": {
"type": "string",
"maxLength": 200,
"description": "Company"
},
"comments": {
"type": "string",
"maxLength": 2000,
"description": "Comments"
},
"revision": {
"type": "string",
"maxLength": 200,
"description": "Drawing revision"
},
"standard": {
"type": "string",
"maxLength": 200,
"description": "Required standard or class"
},
"application": {
"type": "string",
"maxLength": 200,
"description": "Application and environment"
},
"overmolding": {
"type": "string",
"maxLength": 200,
"description": "Overmolding of a junction or connector?"
},
"supplied_by": {
"enum": [
"fillio",
"customer",
"discuss"
],
"type": "string",
"description": "Components supplied by (fillio, customer, discuss)"
},
"annual_volume": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "Expected annual volume"
},
"prototype_date": {
"type": "string",
"maxLength": 200,
"description": "Target date for prototypes"
},
"first_run_quantity": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "First production run quantity"
},
"prototype_quantity": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "Prototype quantity"
}
},
"description": "Project: company, part, quantities, target date, who supplies the components, overmolding of a junction; every field is optional.",
"additionalProperties": false
},
"connectors": {
"type": "array",
"items": {
"type": "object",
"properties": {
"ref": {
"type": "string",
"maxLength": 200,
"description": "Ref."
},
"notes": {
"type": "string",
"maxLength": 200,
"description": "Notes"
},
"housing": {
"type": "string",
"maxLength": 200,
"description": "Housing P/N"
},
"contacts": {
"type": "string",
"maxLength": 200,
"description": "Contact P/N"
},
"positions": {
"type": "integer",
"minimum": 0,
"description": "No. of positions"
},
"accessories": {
"type": "string",
"maxLength": 200,
"description": "Accessories (seal, plug, lock)"
},
"manufacturer": {
"type": "string",
"maxLength": 200,
"description": "Manufacturer"
},
"equivalent_accepted": {
"type": "boolean",
"description": "Equivalent accepted?"
}
},
"additionalProperties": false
},
"maxItems": 100,
"description": "Connectors: one row per end of the harness (ref. J1, J2…), with the manufacturer, housing and contact part numbers and number of positions."
},
"connections": {
"type": "array",
"items": {
"type": "object",
"properties": {
"wire": {
"type": "string",
"maxLength": 200,
"description": "Wire no."
},
"color": {
"type": "string",
"maxLength": 200,
"description": "Color"
},
"notes": {
"type": "string",
"maxLength": 200,
"description": "Notes (shield, twisted pair...)"
},
"signal": {
"type": "string",
"maxLength": 200,
"description": "Signal or function"
},
"to_ref": {
"type": "string",
"maxLength": 200,
"description": "To: ref."
},
"from_ref": {
"type": "string",
"maxLength": 200,
"description": "From: ref."
},
"gauge_awg": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "Gauge (AWG)"
},
"wire_type": {
"type": "string",
"maxLength": 200,
"description": "Wire type"
},
"to_contact": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "To: contact"
},
"from_contact": {
"type": [
"string",
"number"
],
"minimum": 0,
"maxLength": 200,
"description": "From: contact"
}
},
"additionalProperties": false
},
"maxItems": 500,
"description": "Connections (from-to): one row per wire, from one reference and contact to another, with the gauge, colour and wire type."
}
},
"additionalProperties": false
}