MACKORN hydraulic cone crusher selection and crushing-plant design. 21 tools, callable over HTTP.
Maintain this server? Claim it
Call this server's tools from your browser. Nothing to install.
Requests go through mcptry because browsers can't call most MCP servers directly. Header values are sent to the server for that request only and are never stored or logged.
Tool list from our last check. Connect live to refresh it.
MACKORN 自动化与模型选矿方案工具(全价值链第 5 段):按工序与处理量,给自动化分层建议(L0 现场层 / L1 PLC / L2 DCS-SCADA / L3 先进控制)、关键仪表清单(破碎/磨矿/选矿分列,标注哪些是关键)、控制回路清单(给料量/C | mackorn_automation_design [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
只查目录或只做推荐。
是否已有 PLC(L1)。
工序。
是否已有 SCADA/DCS(L2)。
处理量 t/h。
是否有专职维护人员。
是否有在线品位/粒度分析仪表。
This tool isn't marked read-only, so it may change something on the server or in an account you connected.
MACKORN 自动化与模型选矿方案工具(全价值链第 5 段):按工序与处理量,给自动化分层建议(L0 现场层 / L1 PLC / L2 DCS-SCADA / L3 先进控制)、关键仪表清单(破碎/磨矿/选矿分列,标注哪些是关键)、控制回路清单(给料量/C | mackorn_automation_design [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| mode | string | 只查目录或只做推荐。 |
| has_plc | boolean | 是否已有 PLC(L1)。 |
| section | string | 工序。 |
| has_scada | boolean | 是否已有 SCADA/DCS(L2)。 |
| target_tph | number | 处理量 t/h。 |
| has_dedicated_staff | boolean | 是否有专职维护人员。 |
| has_online_analyzer | boolean | 是否有在线品位/粒度分析仪表。 |
{
"type": "object",
"properties": {
"mode": {
"enum": [
"recommend",
"catalog"
],
"type": "string",
"default": "recommend",
"description": "只查目录或只做推荐。"
},
"has_plc": {
"type": "boolean",
"description": "是否已有 PLC(L1)。"
},
"section": {
"enum": [
"破碎",
"磨矿",
"选矿",
"全部"
],
"type": "string",
"default": "全部",
"description": "工序。"
},
"has_scada": {
"type": "boolean",
"description": "是否已有 SCADA/DCS(L2)。"
},
"target_tph": {
"type": "number",
"description": "处理量 t/h。"
},
"has_dedicated_staff": {
"type": "boolean",
"description": "是否有专职维护人员。"
},
"has_online_analyzer": {
"type": "boolean",
"description": "是否有在线品位/粒度分析仪表。"
}
},
"additionalProperties": false
}MACKORN 选矿方法推荐工具(全价值链第 4 段):按矿石类型/目标矿物/解离粒度,推荐选矿方法(浮选 / 重选 / 光电选 / 磁选),给适用条件、预期回收率区间、能耗区间、关键限制,并主动拦截:解离粒度过细(<10μm)或过粗(>200μm)告警、矿泥 | mackorn_beneficiation_selection [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石类型/名称(如 硫化铜矿石 / 磁铁矿 / 金矿 / 石灰石)。 |
| mode | string | 只查目录或只做推荐。 |
| slime_pct | number | 矿泥(-10μm)占比 %。>15% 会强制提示脱泥。 |
| target_tph | number | 处理量 t/h。 |
| feed_p80_mm | number | 磨矿给料 P80 mm(用于判断是否需要预选抛废)。 |
| liberation_um | number | 解离粒度 μm(磨到多细才解离)。低于 10μm 或高于 200μm 会告警。 |
| target_mineral | string | 目标矿物或元素(如 铜 / 金 / 铁 / 钨)。 |
{
"type": "object",
"properties": {
"ore": {
"type": "string",
"description": "矿石类型/名称(如 硫化铜矿石 / 磁铁矿 / 金矿 / 石灰石)。"
},
"mode": {
"enum": [
"recommend",
"catalog"
],
"type": "string",
"default": "recommend",
"description": "只查目录或只做推荐。"
},
"slime_pct": {
"type": "number",
"description": "矿泥(-10μm)占比 %。>15% 会强制提示脱泥。"
},
"target_tph": {
"type": "number",
"description": "处理量 t/h。"
},
"feed_p80_mm": {
"type": "number",
"description": "磨矿给料 P80 mm(用于判断是否需要预选抛废)。"
},
"liberation_um": {
"type": "number",
"description": "解离粒度 μm(磨到多细才解离)。低于 10μm 或高于 200μm 会告警。"
},
"target_mineral": {
"type": "string",
"description": "目标矿物或元素(如 铜 / 金 / 铁 / 钨)。"
}
},
"additionalProperties": false
}用**现场实测筛析数据**标定破碎函数参数 φ/γ/β 与啮合系数:输入某工况的给料筛析与产品筛析(累积通过率 %)+ 该工况 CSS,用最小二乘(有界网格 + 局部细化)反算出与实测最贴合的一套参数,给出拟合优度、逐点残差与可用性判断 | mackorn_calibrate
| Argument | Type | Description |
|---|---|---|
| css_mm* | number | 该工况的紧边排矿口 CSS mm(必填)。 |
| throw_mm | number | 偏心距 mm(默认 25)。 |
| roughness | number | 拟合优度门槛(RMSE,默认 0.06),超过即告警。 |
| feed_points* | array | 给料筛析:至少 2 个点。每点 {size_mm, cum_pct}(cum_pct 为累积通过 %)。 |
| product_points* | array | 产品筛析:至少 3 个点(建议 ≥5)。 |
{
"type": "object",
"required": [
"css_mm",
"feed_points",
"product_points"
],
"properties": {
"css_mm": {
"type": "number",
"description": "该工况的紧边排矿口 CSS mm(必填)。"
},
"throw_mm": {
"type": "number",
"description": "偏心距 mm(默认 25)。"
},
"roughness": {
"type": "number",
"description": "拟合优度门槛(RMSE,默认 0.06),超过即告警。"
},
"feed_points": {
"type": "array",
"items": {
"type": "object",
"required": [
"size_mm",
"cum_pct"
],
"properties": {
"cum_pct": {
"type": "number",
"description": "累积通过 %(0-100)。"
},
"size_mm": {
"type": "number",
"description": "粒径 mm。"
}
},
"additionalProperties": false
},
"description": "给料筛析:至少 2 个点。每点 {size_mm, cum_pct}(cum_pct 为累积通过 %)。"
},
"product_points": {
"type": "array",
"items": {
"type": "object",
"required": [
"size_mm",
"cum_pct"
],
"properties": {
"cum_pct": {
"type": "number",
"description": "累积通过 %(0-100)。"
},
"size_mm": {
"type": "number",
"description": "粒径 mm。"
}
},
"additionalProperties": false
},
"description": "产品筛析:至少 3 个点(建议 ≥5)。"
}
},
"additionalProperties": false
}给定 MACKORN 机型 + 腔型 + 紧边排矿口 CSS,从《NH_NS系列技术参数大全》腔型×CSS 详表查出生产能力区间 t/h(无详表的机型按系列区间外推并标注为近似),同时返回排矿口范围合规性、最大给料限制、外形尺寸与重量 | mackorn_capacity_check
| Argument | Type | Description |
|---|---|---|
| css* | number | 紧边排矿口 CSS,mm。 |
| model* | string | 机型型号。 |
| cavity | string | 腔型代码。 |
| target_tph | number | 目标产量 t/h(可选)。填了本工具会直接给出【能否达到】的判定 —— 复核既有设备时必填。 |
{
"type": "object",
"required": [
"model",
"css"
],
"properties": {
"css": {
"type": "number",
"description": "紧边排矿口 CSS,mm。"
},
"model": {
"enum": [
"NH200",
"NH300",
"NH400",
"NH600",
"NH700",
"NH860",
"NH865",
"NH890",
"NH895",
"NS200",
"NS300",
"NS400",
"NS600"
],
"type": "string",
"description": "机型型号。"
},
"cavity": {
"enum": [
"EC",
"C",
"MC",
"M",
"MF",
"F",
"EF",
"EFX",
"EEF"
],
"type": "string",
"description": "腔型代码。"
},
"target_tph": {
"type": "number",
"description": "目标产量 t/h(可选)。填了本工具会直接给出【能否达到】的判定 —— 复核既有设备时必填。"
}
},
"additionalProperties": false
}MACKORN 液压圆锥破碎机选型主工具:按目标处理量 t/h、给料最大粒度、目标产品粒度与工序(中碎/细碎/超细碎)从 NH 标准型与 NS 高速型单缸液压圆锥破中选出机型 + 腔型 + 紧边排矿口 CSS + 台数,给出候选排序、P80 估计、参考价区间与 | mackorn_cone_selection
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石名称与硬度备注(如"花岗岩 f=12-14")。 |
| stage | string | 工序段;auto 由给料/产品粒度自动推断。 |
| units | integer | 指定并联台数;不填则自动按目标产量推算。 |
| target_tph* | number | 目标处理量 t/h(必填,正数)。 |
| max_feed_mm | number | 进入本段破碎机的最大给料粒度 mm。 |
| closed_circuit | boolean | 是否与筛分构成闭路(默认 true)。闭路会按循环负荷放大系数校核。 |
| target_product_mm | number | 目标最终产品粒度 mm(用于推断工序段与细度可行性)。 |
{
"type": "object",
"required": [
"target_tph"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石名称与硬度备注(如\"花岗岩 f=12-14\")。"
},
"stage": {
"enum": [
"auto",
"中碎",
"细碎",
"超细碎"
],
"type": "string",
"default": "auto",
"description": "工序段;auto 由给料/产品粒度自动推断。"
},
"units": {
"type": "integer",
"description": "指定并联台数;不填则自动按目标产量推算。"
},
"target_tph": {
"type": "number",
"description": "目标处理量 t/h(必填,正数)。"
},
"max_feed_mm": {
"type": "number",
"description": "进入本段破碎机的最大给料粒度 mm。"
},
"closed_circuit": {
"type": "boolean",
"default": true,
"description": "是否与筛分构成闭路(默认 true)。闭路会按循环负荷放大系数校核。"
},
"target_product_mm": {
"type": "number",
"description": "目标最终产品粒度 mm(用于推断工序段与细度可行性)。"
}
},
"additionalProperties": false
}MACKORN 美矿的联系方式与全球招募信息:公司名称、地址(中英文)、三个商务电话与邮箱、官网 mackorn.cn、服务时间 GMT+8 9:00-17:30、微信公众号二维码位置,以及「诚征各地代理商/代理人/选矿人才」的招募条件与申请方式 | mackorn_contact
| Argument | Type | Description |
|---|---|---|
| language | string | 输出语言。支持 zh-CN/en/es/pt-BR/ru/ar/fr/de/ja/id;公司名、地址、电话、邮箱、网址一律原文保留不翻译。 |
| include_partner | boolean | 是否包含代理商/人才招募段落(默认 true)。 |
| include_triggers | boolean | 是否附带多语言触发词覆盖报告(自检用,默认 false)。 |
{
"type": "object",
"properties": {
"language": {
"enum": [
"zh-CN",
"en",
"es",
"pt-BR",
"ru",
"ar",
"fr",
"de",
"ja",
"id"
],
"type": "string",
"default": "zh-CN",
"description": "输出语言。支持 zh-CN/en/es/pt-BR/ru/ar/fr/de/ja/id;公司名、地址、电话、邮箱、网址一律原文保留不翻译。"
},
"include_partner": {
"type": "boolean",
"default": true,
"description": "是否包含代理商/人才招募段落(默认 true)。"
},
"include_triggers": {
"type": "boolean",
"default": false,
"description": "是否附带多语言触发词覆盖报告(自检用,默认 false)。"
}
},
"additionalProperties": false
}MACKORN 液压圆锥破投资与运营成本估算:按机型与台数算装机功率、年电耗、年电费、吨电耗与吨电费 | mackorn_cost_estimate
| Argument | Type | Description |
|---|---|---|
| tph | number | 该机型对应处理量 t/h,用于吨成本换算。 |
| model* | string | 机型型号。 |
| units | integer | 台数(默认 1)。 |
| term_years | integer | 融资租赁年限。 |
| annual_rate | number | 融资租赁年利率(小数,如 0.06);不填则不做月供测算。 |
| load_factor | number | 负荷率 0-1。 |
| hours_per_year | integer | 年运行小时数。 |
| liner_life_hours | number | 衬板寿命 h(项目实测值,用于算衬板吨成本)。 |
| electricity_price | number | 电价 元/kWh。 |
| liner_cost_per_set | number | 单套衬板价格 元/套。 |
| unit_price_wan_cny | number | 实际商务单价 万元/台(有则优先于参考区间)。 |
用 Whiten(1972) 稳态圆锥破模型生成产品粒度曲线:给入料分布 + CSS + 偏心距,算出产品 P80、破碎比、逐级产品分布、啮合区 K1/K2,并给 Bond(1952) 功耗估算 | mackorn_crusher_curve
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石种类(用于取 Bond Wi 文献典型值)。 |
| phi | number | 破碎函数粗粒生成占比(文献典型 0.3-0.6,默认 0.45)。 |
| beta | number | 破碎函数细端指数(文献典型 2.5-5.0,默认 3.5)。 |
| gamma | number | 破碎函数粗端指数(文献典型 0.4-1.0,默认 0.7)。 |
| css_mm* | number | 紧边排矿口 CSS mm(必填)。 |
| feed_n | number | Rosin-Rammler 均匀性指数 n(默认 1.1)。 |
| bond_wi | number | 邦德功指数 kWh/t(不填则按矿石种类取文献典型区间中值)。 |
| throw_mm | number | 偏心距(冲程)mm,默认 25。 |
| speed_rpm | number | 偏心轴转速 rpm(默认 300,影响啮合函数)。 |
| feed_p80_mm* | number | 给料 P80 mm(必填;若给了 feed_distribution 则忽略)。 |
MACKORN 经销商/代理商评估与准入:按「能力 / 可靠 / 匹配」三维 17 项打分(1/3/5 三档),**区分公司代理与个人代理**(个人主体权重上调、授信系数下调),输出分级 A/B/C/D、授信额度建议、风险清单、待核验项与下一步动作,并附公开可 | mackorn_distributor_eval
| Argument | Type | Description |
|---|---|---|
| scores | object | 各维度打分,取值 1 / 3 / 5(1=差,3=中,5=好)。未核验的维度请放入 missing,不要猜。 |
| country | string | 所在国家。 |
| missing | array | 尚未核验的维度名,用于标记未完成尽职调查的项目。未核验项不计入得分,但会拉低核验覆盖率;覆盖率低于60% 不得授信。 |
| agent_type* | string | 主体类型。个人主体风险显著更高,权重会自动上调、授信系数下调。 |
{
"type": "object",
"required": [
"agent_type"
],
"properties": {
"scores": {
"type": "object",
"properties": {
"years": {
"type": "number",
"description": "经营年限:5=不少于10年;3=3-10年;1=少于3年"
},
"capital": {
"type": "number",
"description": "资金实力:5=注册资本≥500万元等值;3=100-500万;1=小于100万或无法开证"
},
"channel": {
"type": "number",
"description": "渠道网络:5=有下级分销或多区域;3=单一区域直销;1=无渠道"
},
"brand_fit": {
"type": "number",
"description": "品牌定位匹配:5=接受MACKORN定位不要求低价冲量;3=可协商;1=只做最低价"
},
"sanctions": {
"type": "number",
"description": "制裁与合规:5=不在任何制裁名单;3=需进一步核查关联方;1=命中制裁名单(一票否决)"
},
"warehouse": {
"type": "number",
"description": "仓储与备件库存能力:5=有仓库且可常备3个以上规格衬板;3=有仓库不备货;1=无仓储"
},
"commitment": {
"type": "number",
"description": "投入意愿:5=愿投入人员/库存/市场费用并接受年度目标;3=愿投入有限;1=只要独家不投入"
},
"sales_team": {
"type": "number",
"description": "销售团队规模:5=≥5名专职销售;3=2-4名;1=1人或无"
},
"entity_type": {
"type": "number",
"description": "主体类型质量:5=有限公司股权清晰可签约可追责;3=个体户/独资;1=纯个人无法律主体"
},
"exclusivity": {
"type": "number",
"description": "竞品代理冲突:5=无竞品或愿签排他;3=代理非直接竞品;1=同时代理美卓/山特维克且不愿排他"
},
"similar_exp": {
"type": "number",
"description": "同类设备经验:5=代理过美卓/山特维克/特雷克斯破碎筛分设备;3=代理过其他矿山设备;1=无矿山设备经验"
},
"market_cover": {
"type": "number",
"description": "市场覆盖与客户资源:5=能列举10+现有矿业/骨料客户;3=有若干稳定客户;1=无明确客户资源"
},
"tech_service": {
"type": "number",
"description": "技术服务能力:5=有专职工程师可独立安装调试;3=有1名或可外包;1=无技术能力只能做贸易"
},
"credit_record": {
"type": "number",
"description": "信用与涉诉:5=无失信无被执行无重大诉讼;3=有轻微已了结纠纷;1=失信被执行/经营异常/重大未决诉讼(一票否决)"
},
"territory_fit": {
"type": "number",
"description": "区域匹配:5=覆盖优先市场且无代理冲突;3=覆盖次要市场;1=与规划冲突"
},
"payment_history": {
"type": "number",
"description": "付款履约历史:5=有2年以上按时付款记录;3=短期合作无违约;1=无记录或有逾期坏账"
},
"reference_check": {
"type": "number",
"description": "第三方背调:5=主动提供3客户+2供应商且回访正面;3=提供但回访一般;1=拒绝提供或回访负面"
}
},
"description": "各维度打分,取值 1 / 3 / 5(1=差,3=中,5=好)。未核验的维度请放入 missing,不要猜。",
"additionalProperties": false
},
"country": {
"type": "string",
"description": "所在国家。"
},
"missing": {
"type": "array",
"items": {
"type": "string",
"description": "维度名,例如 credit_record 或 sanctions"
},
"description": "尚未核验的维度名,用于标记未完成尽职调查的项目。未核验项不计入得分,但会拉低核验覆盖率;覆盖率低于60% 不得授信。"
},
"agent_type": {
"enum": [
"公司",
"个人",
"个体户"
],
"type": "string",
"description": "主体类型。个人主体风险显著更高,权重会自动上调、授信系数下调。"
}
},
"additionalProperties": false
}列出 MACKORN 液压圆锥破全部可选机型与腔型枚举值:NH 标准型 9 个型号、NS 高速型 4 个型号的基本参数(最大给料/排矿口范围/功率/重量/产能),以及 9 种腔型代码的含义与适用场景 | mackorn_equipment_catalog
No arguments.
{
"type": "object",
"properties": [],
"additionalProperties": false
}MACKORN 整线贯通工具(P6):一次调用从【原矿/爆破产物】一路算到【精矿指标】,串起来五段:采矿(爆破块度)→ 粗碎(颚破/旋回)→ 中碎(圆锥破)→ 细碎(圆锥破)→ 磨矿 → 选矿 → 自动化 | mackorn_full_chain [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石类型(如 花岗岩 / 铜矿石)。 |
| muddy | boolean | 原矿是否含泥/黏土夹层。 |
| has_plc | boolean | 是否已有 PLC。 |
| has_scada | boolean | 是否已有 SCADA/DCS。 |
| target_tph* | number | 目标成品处理量 t/h(必填)。 |
| max_feed_mm | number | 原矿最大块度 mm(默认 800)。 |
| liberation_um | number | 解离粒度 μm(选矿段用)。 |
| to_beneficiation | boolean | 是否含磨矿+选矿段(金属矿山)。 |
| target_product_mm | number | 最终产品粒度 mm(默认 20)。 |
| has_dedicated_staff | boolean | 是否有专职维护人员。 |
按粗/中/细三组分配比计算料层孔隙率 φ(经验模型 φ = 0.42 − 0.30·min(中料占比,0.35) + 0.15·max(0, 细料占比 − 0.30)),与最优配比窗口(粗 50% / 中 30% / 细 20%,最优孔隙率 0.28)对比,判 | mackorn_grading_porosity
| Argument | Type | Description |
|---|---|---|
| mid_frac* | number | 中间粒级占比(关键充填相)。 |
| fine_frac* | number | 细颗粒占比。 |
| coarse_frac* | number | 粗骨料占比(可为任意一致单位,内部归一化)。 |
{
"type": "object",
"required": [
"coarse_frac",
"mid_frac",
"fine_frac"
],
"properties": {
"mid_frac": {
"type": "number",
"description": "中间粒级占比(关键充填相)。"
},
"fine_frac": {
"type": "number",
"description": "细颗粒占比。"
},
"coarse_frac": {
"type": "number",
"description": "粗骨料占比(可为任意一致单位,内部归一化)。"
}
},
"additionalProperties": false
}MACKORN 磨矿选型工具(全价值链第 3 段):按处理量 t/h + 给料 P80 + 目标产品 P80,选磨矿方式(半自磨 SAG / 球磨 / 高压辊磨 HPGR),给功率量级、比能耗区间、分级设备建议(螺旋分级机 / 水力旋流器),并主动拦截越界(球 | mackorn_grinding_selection [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石名称或硬度备注(如 铁矿石 f=12-14)。 |
| mode | string | 只查目录或只做选型。 |
| target_tph* | number | 处理量 t/h(必填)。 |
| feed_p80_mm | number | 磨矿给料 P80 mm(球磨典型 ≤25mm;半自磨 ≤350mm)。 |
| closed_circuit | boolean | 是否闭路(默认 true;闭路需配分级设备)。 |
| product_p80_mm | number | 目标产品 P80 mm(如 0.075 = 75μm)。 |
{
"type": "object",
"required": [
"target_tph"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石名称或硬度备注(如 铁矿石 f=12-14)。"
},
"mode": {
"enum": [
"select",
"catalog"
],
"type": "string",
"default": "select",
"description": "只查目录或只做选型。"
},
"target_tph": {
"type": "number",
"description": "处理量 t/h(必填)。"
},
"feed_p80_mm": {
"type": "number",
"description": "磨矿给料 P80 mm(球磨典型 ≤25mm;半自磨 ≤350mm)。"
},
"closed_circuit": {
"type": "boolean",
"description": "是否闭路(默认 true;闭路需配分级设备)。"
},
"product_p80_mm": {
"type": "number",
"description": "目标产品 P80 mm(如 0.075 = 75μm)。"
}
},
"additionalProperties": false
}返回 MACKORN 行业情报的固定观测面与可执行研究简报:山特维克/美卓新品与专利动向、中国与国际破碎机专利(IPC B02C 2/00 等)、国家标准更新、矿山机械市场数据 | mackorn_intel_watch
| Argument | Type | Description |
|---|---|---|
| focus | string | 只取某个观测项:观测项 id(如 W-SANDVIK / W-PATENT-INTL)或类别(竞品动向/专利/标准规范/市场)。不填则只返回"已到期该采集"的项。 |
{
"type": "object",
"properties": {
"focus": {
"type": "string",
"description": "只取某个观测项:观测项 id(如 W-SANDVIK / W-PATENT-INTL)或类别(竞品动向/专利/标准规范/市场)。不填则只返回\"已到期该采集\"的项。"
}
},
"additionalProperties": false
}MACKORN 颚破选型工具(粗碎段):按目标产能 t/h + 最大给料粒度,反推进料口需求(进料口 ≥ 最大给料 / 0.85),按工况打折(硬岩 ×0.85 / 大块 ×0.85 / 含水 ×0.85 / 含泥 ×0.75),输出档位机型 + 台数 + 功 | mackorn_jaw_selection [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石类型(如 铂金矿 / 花岗岩)。 |
| mode | string | 模式。 |
| muddy | boolean | 是否含泥/黏性。 |
| ucs_mpa | number | 抗压强度 MPa(用于工况打折)。 |
| target_tph* | number | 目标产能 t/h(必填)。 |
| max_feed_mm* | number | 最大给料粒度 mm(必填)。 |
| moisture_pct | number | 含水率 %。 |
| closed_circuit | boolean | 是否闭路(粗碎通常开路,默认 false)。 |
{
"type": "object",
"required": [
"target_tph",
"max_feed_mm"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石类型(如 铂金矿 / 花岗岩)。"
},
"mode": {
"enum": [
"select",
"catalog"
],
"type": "string",
"default": "select",
"description": "模式。"
},
"muddy": {
"type": "boolean",
"description": "是否含泥/黏性。"
},
"ucs_mpa": {
"type": "number",
"description": "抗压强度 MPa(用于工况打折)。"
},
"target_tph": {
"type": "number",
"description": "目标产能 t/h(必填)。"
},
"max_feed_mm": {
"type": "number",
"description": "最大给料粒度 mm(必填)。"
},
"moisture_pct": {
"type": "number",
"description": "含水率 %。"
},
"closed_circuit": {
"type": "boolean",
"description": "是否闭路(粗碎通常开路,默认 false)。"
}
},
"additionalProperties": false
}MACKORN 知识库总入口:① 岩石/矿石性质(14 种材料的 UCS / Bond Wi / 密度 / 莫氏硬度 / 磨蚀指数 / 含水率,带来源等级)② 选型提示(腔型 / 段数 / 衬板 / 风险告警)③ 经验库与错误库的判定状态(正判 / 模棱两可 | mackorn_knowledge
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石/岩石名称(中文或英文,如 花岗岩 / granite / 玄武岩)。 |
| section | string | 只取某一节。 |
| target_tph | number | 目标处理量 t/h(可选,用于匹配对标案例)。 |
{
"type": "object",
"properties": {
"ore": {
"type": "string",
"description": "矿石/岩石名称(中文或英文,如 花岗岩 / granite / 玄武岩)。"
},
"section": {
"enum": [
"all",
"material",
"experience",
"cases",
"preflight"
],
"type": "string",
"default": "all",
"description": "只取某一节。"
},
"target_tph": {
"type": "number",
"description": "目标处理量 t/h(可选,用于匹配对标案例)。"
}
},
"additionalProperties": false
}把新采集到的行业情报/竞品动态/专利/标准/案例写入 MACKORN 持久化知识库,并自动完成:①来源可信度分级(1-5,白名单域名提档)②数值矛盾检测(功率/产能/CSS/价格/能耗等字段两两比对,超容差即记冲突)③版本演进判定(矛盾处置率≥0.8 且覆盖率 | mackorn_knowledge_update
| Argument | Type | Description |
|---|---|---|
| actor | string | 操作者(如 销售-戴雷 / ai)。 |
| entries* | array | 要写入的知识条目数组。每条必须带 title、content、source_url。 |
| rationale | string | 本轮采集/更新的目的说明。 |
| tolerance | number | 数值矛盾容差(默认 0.1,即相差 10% 以上才算矛盾)。 |
| check_fields | array | 要检测矛盾的字段(默认全部)。 |
| crushing_leverage_score | number | 破碎效率杠杆得分 0-1(用于版本演进判定)。 |
{
"type": "object",
"required": [
"entries"
],
"properties": {
"actor": {
"type": "string",
"description": "操作者(如 销售-戴雷 / ai)。"
},
"entries": {
"type": "array",
"items": {
"type": "object",
"required": [
"title",
"content",
"source_url"
],
"properties": {
"kind": {
"enum": [
"intel",
"patent",
"standard",
"market",
"spec",
"price",
"case",
"correction"
],
"type": "string",
"description": "条目类型。"
},
"tags": {
"type": "array",
"items": {
"type": "string"
},
"description": "标签,如 [\"竞品\",\"山特维克\"]。"
},
"title": {
"type": "string",
"description": "标题(必填)。"
},
"content": {
"type": "string",
"description": "正文/事实与数字(必填)。"
},
"subject": {
"type": "string",
"description": "主题键:把\"讲同一件事\"的条目归到同一主题(如 \"300TPH-圆锥破配置\"),矛盾检测只在该主题内比较。型号类条目通常自带型号实体,可不填。"
},
"source_url": {
"type": "string",
"description": "来源链接或可核查出处(必填,缺失即拒收)。"
},
"source_type": {
"enum": [
"official",
"academic",
"report",
"conference",
"media",
"expert"
],
"type": "string",
"description": "来源类型,影响可信度基线。"
},
"publish_date": {
"type": "string",
"description": "发布日期 YYYY-MM-DD。"
},
"citation_count": {
"type": "integer",
"description": "被引次数(>50 可信度 +1)。"
},
"has_peer_review": {
"type": "boolean",
"description": "是否同行评审(可信度 +1)。"
},
"verification_status": {
"enum": [
"pending",
"verified",
"cross_validated",
"disputed"
],
"type": "string",
"description": "核验状态。"
}
},
"additionalProperties": false
},
"description": "要写入的知识条目数组。每条必须带 title、content、source_url。"
},
"rationale": {
"type": "string",
"description": "本轮采集/更新的目的说明。"
},
"tolerance": {
"type": "number",
"description": "数值矛盾容差(默认 0.1,即相差 10% 以上才算矛盾)。"
},
"check_fields": {
"type": "array",
"items": {
"type": "string"
},
"description": "要检测矛盾的字段(默认全部)。"
},
"crushing_leverage_score": {
"type": "number",
"description": "破碎效率杠杆得分 0-1(用于版本演进判定)。"
}
},
"additionalProperties": false
}MACKORN 液压圆锥破市场纵深分析:返回"行业/技术/时效/经济/可操作"五维评估框架与打分口径、破碎效率核心杠杆链、竞品对标矩阵(美卓 HP / 山特维克 CS / 特雷克斯 / 克虏伯)、美矿优势与差距、客户痛点应对话术、报价影响因素与价格参考区间 | mackorn_market_intel
| Argument | Type | Description |
|---|---|---|
| focus | string | 分析焦点(区域市场/客户类型/竞品品牌等)。 |
| scores | object |
{
"type": "object",
"properties": {
"focus": {
"type": "string",
"description": "分析焦点(区域市场/客户类型/竞品品牌等)。"
},
"scores": {
"type": "object",
"properties": {
"industry": {
"type": "object",
"required": [
"score"
],
"properties": {
"score": {
"type": "number",
"description": "1-5 分。"
},
"weight": {
"type": "number",
"description": "权重(默认 1)。"
},
"evidence": {
"type": "array",
"items": {
"type": "string"
},
"description": "支撑该评分的证据(报告名/页码/报价单编号等)。"
}
},
"additionalProperties": false
},
"economics": {
"type": "object",
"required": [
"score"
],
"properties": {
"score": {
"type": "number",
"description": "1-5 分。"
},
"weight": {
"type": "number",
"description": "权重(默认 1)。"
},
"evidence": {
"type": "array",
"items": {
"type": "string"
},
"description": "支撑该评分的证据(报告名/页码/报价单编号等)。"
}
},
"additionalProperties": false
},
"technology": {
"type": "object",
"required": [
"score"
],
"properties": {
"score": {
"type": "number",
"description": "1-5 分。"
},
"weight": {
"type": "number",
"description": "权重(默认 1)。"
},
"evidence": {
"type": "array",
"items": {
"type": "string"
},
"description": "支撑该评分的证据(报告名/页码/报价单编号等)。"
}
},
"additionalProperties": false
},
"timeliness": {
"type": "object",
"required": [
"score"
],
"properties": {
"score": {
"type": "number",
"description": "1-5 分。"
},
"weight": {
"type": "number",
"description": "权重(默认 1)。"
},
"evidence": {
"type": "array",
"items": {
"type": "string"
},
"description": "支撑该评分的证据(报告名/页码/报价单编号等)。"
}
},
"additionalProperties": false
},
"operability": {
"type": "object",
"required": [
"score"
],
"properties": {
"score": {
"type": "number",
"description": "1-5 分。"
},
"weight": {
"type": "number",
"description": "权重(默认 1)。"
},
"evidence": {
"type": "array",
"items": {
"type": "string"
},
"description": "支撑该评分的证据(报告名/页码/报价单编号等)。"
}
},
"additionalProperties": false
}
},
"additionalProperties": false
}
},
"additionalProperties": false
}MACKORN 统计分析工具:①描述统计(均值/中位数/CV/偏度/峰度/分位数)②市场集中度(CR/HHI/Gini)③线性回归与残差分析(找"排名看不出来"的机会)④威布尔拟合(用现场换衬板记录预测 B10 寿命)⑤增长率基数效应修正(小基数高增长是噪声) | mackorn_market_stats
| Argument | Type | Description |
|---|---|---|
| mode* | string | 分析模式。 |
| lives | array | weibull 模式:现场换衬板记录(寿命小时),至少 3 个,建议 ≥5。 |
| values | array | describe / concentration 模式:数值数组(如各国进口额)。 |
| items_json | string | growth 模式:JSON 字符串,形如 "[{\"name\":\"哈萨克\",\"base\":6.5,\"latest\":268.5}, ...]"。base = 基期值,latest = 最新值。 |
| pairs_json | string | residual 模式:JSON 字符串,形如 "[[整机进口额, 零件进口额], ...]",最少 3 组。例:"[[347.2,20.8],[268.5,136.8],[207.6,562.1]]" |
{
"type": "object",
"required": [
"mode"
],
"properties": {
"mode": {
"enum": [
"describe",
"concentration",
"residual",
"weibull",
"growth"
],
"type": "string",
"description": "分析模式。"
},
"lives": {
"type": "array",
"items": {
"type": "number"
},
"description": "weibull 模式:现场换衬板记录(寿命小时),至少 3 个,建议 ≥5。"
},
"values": {
"type": "array",
"items": {
"type": "number"
},
"description": "describe / concentration 模式:数值数组(如各国进口额)。"
},
"items_json": {
"type": "string",
"description": "growth 模式:JSON 字符串,形如 \"[{\\\"name\\\":\\\"哈萨克\\\",\\\"base\\\":6.5,\\\"latest\\\":268.5}, ...]\"。base = 基期值,latest = 最新值。"
},
"pairs_json": {
"type": "string",
"description": "residual 模式:JSON 字符串,形如 \"[[整机进口额, 零件进口额], ...]\",最少 3 组。例:\"[[347.2,20.8],[268.5,136.8],[207.6,562.1]]\""
}
},
"additionalProperties": false
}计算 MACKORN 粗粒级给料模数 MCFM(M=(A1+…+A7−7A8)/(100−A8)),判定是否落在工程最优窗口 4.0-4.5,并给出"均匀布料 → 速度均匀化 → 磨损稳定 → 模数恒定"的杠杆调整建议 | mackorn_mcfm_analysis
| Argument | Type | Description |
|---|---|---|
| ore_note | string | 矿石名称/硬度/含泥量等备注,原样回显。 |
| feed_top_mm | number | 给料最大粒度 mm,用于上下文校验。 |
| target_product_mm | number | 目标最终产品粒度 mm。 |
| cumulative_retained* | array | 长度必须为 8 的累积筛余百分比数组,依次对应 最大给料/60/40/20/10/5/2.5mm 与 80% 通过粒级(A1..A8,单位 %)。 |
{
"type": "object",
"required": [
"cumulative_retained"
],
"properties": {
"ore_note": {
"type": "string",
"description": "矿石名称/硬度/含泥量等备注,原样回显。"
},
"feed_top_mm": {
"type": "number",
"description": "给料最大粒度 mm,用于上下文校验。"
},
"target_product_mm": {
"type": "number",
"description": "目标最终产品粒度 mm。"
},
"cumulative_retained": {
"type": "array",
"items": {
"type": "number"
},
"description": "长度必须为 8 的累积筛余百分比数组,依次对应 最大给料/60/40/20/10/5/2.5mm 与 80% 通过粒级(A1..A8,单位 %)。"
}
},
"additionalProperties": false
}MACKORN 采矿与破碎接口工具(全价值链第 1 段):① 采矿工序链(剥离 / 钻孔爆破 / 铲装 / 短倒短驳)与关键指标 ② Kuz-Ram 爆破块度预测(给 A/V/Q 算爆堆 P50/P80/P90) ③ 爆破块度对粗碎选型的影响(最关键接口) ④ | mackorn_mining_interface [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| mode | string | 模式。 |
| muddy | boolean | 是否含泥/黏土夹层。 |
| blast_A | number | Kuz-Ram 岩石系数 A(中硬 7 / 硬 10 / 非常硬 13)——必须现场标定。 |
| blast_Q | number | Kuz-Ram 单孔装药量 kg。 |
| blast_V | number | Kuz-Ram 每孔爆破体积 m³。 |
| haul_km | number | 运距 km(短倒/短驳)。 |
| rock_type | string | 岩石类型(如 花岗岩 / 石灰石)。 |
| target_tph | number | 下游处理量 t/h。 |
| max_feed_mm | number | 原矿最大块度 mm。 |
| stripping_ratio | number | 剥采比(剥离量/采矿量)。 |
查看并推进 MACKORN 插件的自我优化循环(PDCA):当前模型版本与知识库修订号、条目数与可信度分布、矛盾台账(open/建议值/处置率)、四项演进指标、版本演进阈值、到期的情报观测项、以及"本轮该做什么"的优化建议清单 | mackorn_pdca_status
| Argument | Type | Description |
|---|---|---|
| act | string | Act:下轮要固化的改进或要修正的偏差。 |
| plan | string | Plan:本轮计划做什么。 |
| actor | string | 操作者。 |
| check | string | Check:本轮结果核对。 |
| action | string | status=只看状态(默认);record=记录一轮 PDCA。 |
| do_items | array | Do:本轮实际做了哪些动作。 |
{
"type": "object",
"properties": {
"act": {
"type": "string",
"description": "Act:下轮要固化的改进或要修正的偏差。"
},
"plan": {
"type": "string",
"description": "Plan:本轮计划做什么。"
},
"actor": {
"type": "string",
"description": "操作者。"
},
"check": {
"type": "string",
"description": "Check:本轮结果核对。"
},
"action": {
"enum": [
"status",
"record"
],
"type": "string",
"default": "status",
"description": "status=只看状态(默认);record=记录一轮 PDCA。"
},
"do_items": {
"type": "array",
"items": {
"type": "string"
},
"description": "Do:本轮实际做了哪些动作。"
}
},
"additionalProperties": false
}MACKORN 破碎筛分生产线总体配置:按原矿最大粒度与目标产品粒度计算总破碎比、推荐破碎段数、各段给料/产品/破碎比分配,并对中碎段与细碎段各做一次液压圆锥破选型,同时给出筛分面积、输送带带宽、辅机(给料机/除铁器/除尘/洗砂/AORS)配置建议 | mackorn_plant_design
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石名称/硬度/含泥量备注。 |
| washing | boolean | 是否需要洗砂/污水处理系统(默认 false)。 |
| target_tph* | number | 目标成品处理量 t/h(必填)。 |
| max_feed_mm | number | 原矿最大给料粒度 mm(默认 500)。 |
| closed_circuit | boolean | 细碎段是否闭路(默认 true)。 |
| target_product_mm | number | 最终产品粒度 mm(默认 20)。 |
{
"type": "object",
"required": [
"target_tph"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石名称/硬度/含泥量备注。"
},
"washing": {
"type": "boolean",
"default": false,
"description": "是否需要洗砂/污水处理系统(默认 false)。"
},
"target_tph": {
"type": "number",
"description": "目标成品处理量 t/h(必填)。"
},
"max_feed_mm": {
"type": "number",
"default": 500,
"description": "原矿最大给料粒度 mm(默认 500)。"
},
"closed_circuit": {
"type": "boolean",
"default": true,
"description": "细碎段是否闭路(默认 true)。"
},
"target_product_mm": {
"type": "number",
"default": 20,
"description": "最终产品粒度 mm(默认 20)。"
}
},
"additionalProperties": false
}按 MACKORN 标准方案口径,把客户需求一次性生成一份**可直接交付的方案书**(Markdown) | mackorn_proposal
| Argument | Type | Description |
|---|---|---|
| date | string | 编制日期(YYYY-MM-DD)。 |
| scope | string | 需求内容。 |
| title | string | 方案标题(不填自动生成)。 |
| project | string | 项目名称。 |
| ore_type | string | 矿石种类。 |
| form_text | string | 客户需求表的文字内容(可整段粘贴,工具自动抽取字段)。 |
| line_type | string | 产线类型。 |
| cost_model | string | 用于投资估算的机型(不填则第 10 节留空)。 |
| cost_units | integer | 投资估算台数。 |
| product_mm | number | 成品粒度要求(mm 以下)。 |
| client_name | string | 客户名称。 |
| max_feed_mm | number |
把 MACKORN《砂石骨料/金属矿山生产线客户需求信息输入表》的内容 + 客户要求的产量,一次性变成「还缺什么要问客户」+「该配什么设备」的完整解答 | mackorn_requirement_intake
| Argument | Type | Description |
|---|---|---|
| date | string | 日期。 |
| scope | string | 需求内容。 |
| ore_use | string | 产品主要用途(建筑骨料/高钙石/水泥原料/机制砂)。 |
| ore_type | string | 矿石种类(花岗岩/玄武岩/石灰石/铁矿石…)。 |
| belt_type | string | 皮带机选型。 |
| form_text | string | 客户需求表的文字内容(Word 转文本或直接粘贴)。工具会自动抽取最大给料粒度、产量、含土量、含水率、抗压强度、成品粒度、工作制等数值字段。 |
| line_type | string | 产线类型。 |
| grade_note | string | 矿石品位 / 抛废率(金属矿山)。 |
| ore_source | string | 矿石来源。 |
| product_mm | number | 成品粒度要求(mm 以下)。 |
| soil_level | string | 含土程度。 |
MACKORN 筛分选型工具:按给料量 t/h + 筛孔 mm + 目标效率,算筛分面积(A = Q/(q·K1..K6))、台数、层数、推荐尺寸(宽×长)、闭路循环负荷与上游放大倍数,并给价格参考区间 | mackorn_screen_selection [本远程端点未实现计算内核,请用本地 MCP 服务端:npx mackorn-cone-crusher 或见 https://mackorn.cn/ai/]
| Argument | Type | Description |
|---|---|---|
| mode | string | 模式。 |
| feed_tph* | number | 给料量 t/h(必填)。 |
| aperture_mm* | number | 筛孔 mm(必填)。 |
| feed_p80_mm | number | 给料 P80 mm(用于检查筛孔是否合理)。 |
| screen_type | string | 筛型(默认自动)。 |
| bulk_density | number | 松散密度 t/m³(默认 1.6)。 |
| moisture_pct | number | 含水率 %。>8% 会强制告警防堵。 |
| closed_circuit | boolean | 是否闭路(默认 true,检查筛通常闭路)。 |
| target_efficiency | number | 目标筛分效率 %(默认 85)。 |
{
"type": "object",
"required": [
"feed_tph",
"aperture_mm"
],
"properties": {
"mode": {
"enum": [
"select",
"catalog"
],
"type": "string",
"default": "select",
"description": "模式。"
},
"feed_tph": {
"type": "number",
"description": "给料量 t/h(必填)。"
},
"aperture_mm": {
"type": "number",
"description": "筛孔 mm(必填)。"
},
"feed_p80_mm": {
"type": "number",
"description": "给料 P80 mm(用于检查筛孔是否合理)。"
},
"screen_type": {
"enum": [
"圆振动筛(YK/YA)",
"直线振动筛(ZK/ZKR)",
"高频筛(GPS)",
"概率筛(GLS)"
],
"type": "string",
"default": "圆振动筛(YK/YA)",
"description": "筛型(默认自动)。"
},
"bulk_density": {
"type": "number",
"description": "松散密度 t/m³(默认 1.6)。"
},
"moisture_pct": {
"type": "number",
"description": "含水率 %。>8% 会强制告警防堵。"
},
"closed_circuit": {
"type": "boolean",
"description": "是否闭路(默认 true,检查筛通常闭路)。"
},
"target_efficiency": {
"type": "number",
"description": "目标筛分效率 %(默认 85)。"
}
},
"additionalProperties": false
}MACKORN 液压圆锥破生产线选型报告一键生成:把生产线配置、圆锥破选型、MCFM 诊断、成本估算、衬板设计串成一份 Markdown 报告,并自动汇总全部"假设与来源"和"风险与待确认项" | mackorn_selection_report
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石名称/硬度备注。 |
| stage | string | 圆锥破工序段。 |
| title | string | 报告标题。 |
| project | string | 项目名称。 |
| cost_tph | number | 成本估算对应处理量 t/h。 |
| cost_model | string | 成本估算所用机型。 |
| cost_units | integer | 成本估算台数。 |
| target_tph* | number | 目标处理量 t/h(必填,用于生产线配置与选型)。 |
| wear_rates | array | 各截面实测磨损速率(可选)。 |
| max_feed_mm | number | 原矿/本段最大给料粒度 mm。 |
| include_cost | boolean | 是否纳入成本估算(默认 true)。 |
多段破碎 + 筛分 + 闭路流程模拟:按段定义逐段算产品粒度与循环负荷,用群体平衡迭代到稳态,输出各段入料/出料 P80、破碎比、筛下率、循环负荷、最终产品 P80,并校核物料平衡 | mackorn_simulate_flowsheet
| Argument | Type | Description |
|---|---|---|
| ore | string | 矿石种类。 |
| feed_n | number | Rosin-Rammler 均匀性指数 n(默认 1.1)。 |
| stages* | array | 段定义数组,按顺序。破碎段 {type:"crusher", name, css_mm, throw_mm};筛分段 {type:"screen", name, aperture_mm, recirculate_to}(recirculate_to 为返回的破碎段下标,不填则返回上一破碎段)。 |
| bond_wi | number | 邦德功指数 kWh/t。 |
| max_iter | integer | 最大迭代次数(默认 200)。 |
| feed_p80_mm* | number | 新鲜给料 P80 mm(必填)。 |
{
"type": "object",
"required": [
"feed_p80_mm",
"stages"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石种类。"
},
"feed_n": {
"type": "number",
"description": "Rosin-Rammler 均匀性指数 n(默认 1.1)。"
},
"stages": {
"type": "array",
"items": {
"type": "object",
"required": [
"type"
],
"properties": {
"name": {
"type": "string",
"description": "段名称。"
},
"type": {
"enum": [
"crusher",
"screen"
],
"type": "string",
"description": "段类型。"
},
"css_mm": {
"type": "number",
"description": "破碎段:紧边排矿口 mm。"
},
"throw_mm": {
"type": "number",
"description": "破碎段:偏心距 mm。"
},
"aperture_mm": {
"type": "number",
"description": "筛分段:筛孔 mm。"
},
"recirculate_to": {
"type": "integer",
"description": "筛分段:筛上返回的破碎段下标。"
},
"screen_efficiency": {
"type": "number",
"description": "筛分段:总筛分效率 0-1(默认 0.9)。"
}
},
"additionalProperties": false
},
"description": "段定义数组,按顺序。破碎段 {type:\"crusher\", name, css_mm, throw_mm};筛分段 {type:\"screen\", name, aperture_mm, recirculate_to}(recirculate_to 为返回的破碎段下标,不填则返回上一破碎段)。"
},
"bond_wi": {
"type": "number",
"description": "邦德功指数 kWh/t。"
},
"max_iter": {
"type": "integer",
"description": "最大迭代次数(默认 200)。"
},
"feed_p80_mm": {
"type": "number",
"description": "新鲜给料 P80 mm(必填)。"
}
},
"additionalProperties": false
}沿破碎腔高度离散截面评估衬板磨损均匀度(均匀度 = 1 − σ/μ,均等化条件 dW/dt ≈ const),给出多梯度分区硬度设计 H_i = H_base × k^i,并给出磨损均匀度提升量 | mackorn_wear_design
| Argument | Type | Description |
|---|---|---|
| sections | integer | 沿腔高离散截面数(3-12,默认 5)。 |
| wear_rates | array | 各截面实测磨损速率(mm/1000h 或任意一致单位),长度应等于截面数。 |
| base_hardness | number | 基础分区硬度 HB(默认 58)。 |
| gradient_factor | number | 硬度梯度因子(默认 1.12)。 |
{
"type": "object",
"properties": {
"sections": {
"type": "integer",
"default": 5,
"description": "沿腔高离散截面数(3-12,默认 5)。"
},
"wear_rates": {
"type": "array",
"items": {
"type": "number"
},
"description": "各截面实测磨损速率(mm/1000h 或任意一致单位),长度应等于截面数。"
},
"base_hardness": {
"type": "number",
"default": 58,
"description": "基础分区硬度 HB(默认 58)。"
},
"gradient_factor": {
"type": "number",
"default": 1.12,
"description": "硬度梯度因子(默认 1.12)。"
}
},
"additionalProperties": false
}{
"type": "object",
"required": [
"model"
],
"properties": {
"tph": {
"type": "number",
"description": "该机型对应处理量 t/h,用于吨成本换算。"
},
"model": {
"enum": [
"NH200",
"NH300",
"NH400",
"NH600",
"NH700",
"NH860",
"NH865",
"NH890",
"NH895",
"NS200",
"NS300",
"NS400",
"NS600"
],
"type": "string",
"description": "机型型号。"
},
"units": {
"type": "integer",
"default": 1,
"description": "台数(默认 1)。"
},
"term_years": {
"type": "integer",
"description": "融资租赁年限。"
},
"annual_rate": {
"type": "number",
"description": "融资租赁年利率(小数,如 0.06);不填则不做月供测算。"
},
"load_factor": {
"type": "number",
"description": "负荷率 0-1。"
},
"hours_per_year": {
"type": "integer",
"description": "年运行小时数。"
},
"liner_life_hours": {
"type": "number",
"description": "衬板寿命 h(项目实测值,用于算衬板吨成本)。"
},
"electricity_price": {
"type": "number",
"description": "电价 元/kWh。"
},
"liner_cost_per_set": {
"type": "number",
"description": "单套衬板价格 元/套。"
},
"unit_price_wan_cny": {
"type": "number",
"description": "实际商务单价 万元/台(有则优先于参考区间)。"
}
},
"additionalProperties": false
}| throw_factor |
| number |
| 啮合区宽度系数(文献典型 0.5-1.0,默认 0.8)。 |
| feed_distribution | string | 给料粒度分布形式(由 P80 拟合)。 |
{
"type": "object",
"required": [
"css_mm",
"feed_p80_mm"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石种类(用于取 Bond Wi 文献典型值)。"
},
"phi": {
"type": "number",
"description": "破碎函数粗粒生成占比(文献典型 0.3-0.6,默认 0.45)。"
},
"beta": {
"type": "number",
"description": "破碎函数细端指数(文献典型 2.5-5.0,默认 3.5)。"
},
"gamma": {
"type": "number",
"description": "破碎函数粗端指数(文献典型 0.4-1.0,默认 0.7)。"
},
"css_mm": {
"type": "number",
"description": "紧边排矿口 CSS mm(必填)。"
},
"feed_n": {
"type": "number",
"description": "Rosin-Rammler 均匀性指数 n(默认 1.1)。"
},
"bond_wi": {
"type": "number",
"description": "邦德功指数 kWh/t(不填则按矿石种类取文献典型区间中值)。"
},
"throw_mm": {
"type": "number",
"description": "偏心距(冲程)mm,默认 25。"
},
"speed_rpm": {
"type": "number",
"description": "偏心轴转速 rpm(默认 300,影响啮合函数)。"
},
"feed_p80_mm": {
"type": "number",
"description": "给料 P80 mm(必填;若给了 feed_distribution 则忽略)。"
},
"throw_factor": {
"type": "number",
"description": "啮合区宽度系数(文献典型 0.5-1.0,默认 0.8)。"
},
"feed_distribution": {
"enum": [
"rosin-rammler",
"gaudin-schuhmann"
],
"type": "string",
"default": "rosin-rammler",
"description": "给料粒度分布形式(由 P80 拟合)。"
}
},
"additionalProperties": false
}| has_online_analyzer |
| boolean |
| 是否有在线品位/粒度分析。 |
{
"type": "object",
"required": [
"target_tph"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石类型(如 花岗岩 / 铜矿石)。"
},
"muddy": {
"type": "boolean",
"description": "原矿是否含泥/黏土夹层。"
},
"has_plc": {
"type": "boolean",
"description": "是否已有 PLC。"
},
"has_scada": {
"type": "boolean",
"description": "是否已有 SCADA/DCS。"
},
"target_tph": {
"type": "number",
"description": "目标成品处理量 t/h(必填)。"
},
"max_feed_mm": {
"type": "number",
"description": "原矿最大块度 mm(默认 800)。"
},
"liberation_um": {
"type": "number",
"description": "解离粒度 μm(选矿段用)。"
},
"to_beneficiation": {
"type": "boolean",
"description": "是否含磨矿+选矿段(金属矿山)。"
},
"target_product_mm": {
"type": "number",
"description": "最终产品粒度 mm(默认 20)。"
},
"has_dedicated_staff": {
"type": "boolean",
"description": "是否有专职维护人员。"
},
"has_online_analyzer": {
"type": "boolean",
"description": "是否有在线品位/粒度分析。"
}
},
"additionalProperties": false
}{
"type": "object",
"properties": {
"mode": {
"enum": [
"recommend",
"kuzram",
"catalog"
],
"type": "string",
"default": "recommend",
"description": "模式。"
},
"muddy": {
"type": "boolean",
"description": "是否含泥/黏土夹层。"
},
"blast_A": {
"type": "number",
"description": "Kuz-Ram 岩石系数 A(中硬 7 / 硬 10 / 非常硬 13)——必须现场标定。"
},
"blast_Q": {
"type": "number",
"description": "Kuz-Ram 单孔装药量 kg。"
},
"blast_V": {
"type": "number",
"description": "Kuz-Ram 每孔爆破体积 m³。"
},
"haul_km": {
"type": "number",
"description": "运距 km(短倒/短驳)。"
},
"rock_type": {
"type": "string",
"description": "岩石类型(如 花岗岩 / 石灰石)。"
},
"target_tph": {
"type": "number",
"description": "下游处理量 t/h。"
},
"max_feed_mm": {
"type": "number",
"description": "原矿最大块度 mm。"
},
"stripping_ratio": {
"type": "number",
"description": "剥采比(剥离量/采矿量)。"
}
},
"additionalProperties": false
}| 原矿最大给料粒度 mm。 |
| salesperson | string | 业务员。 |
| belt_sealing | string | 皮带机密封形式。 |
| capacity_tph* | number | 客户要求的成品产量 t/h(必填)。 |
| moisture_pct | number | 原矿含水率 %。 |
| storage_type | string | 储料形式。 |
| days_per_year | integer | 每年工作天数。 |
| hours_per_day | integer | 每天工作小时。 |
| product_specs | array | 成品骨料规格清单。 |
| hours_per_year | integer | 年运行小时数(不填则按工作制推算)。 |
| dust_limit_mgm3 | number | 环保要求 mg/m³。 |
| total_reserve_t | number | 矿山总储量 吨。 |
| liner_life_hours | number | 衬板寿命 h(用于衬板吨成本)。 |
| project_location | string | 项目地点。 |
| electrical_origin | string | 电气元件及软启动。 |
| electricity_price | number | 电价 元/kWh。 |
| production_method | string | 生产方式。 |
| liner_cost_per_set | number | 单套衬板价格 元/套。 |
| other_requirements | string | 客户其他需求(原样写入方案)。 |
| storage_capacity_t | number | 储料仓容 吨。 |
| unit_price_wan_cny | number | 实际商务单价 万元/台。 |
| compressive_strength_mpa | number | 抗压强度 MPa。 |
{
"type": "object",
"required": [
"capacity_tph"
],
"properties": {
"date": {
"type": "string",
"description": "编制日期(YYYY-MM-DD)。"
},
"scope": {
"enum": [
"主机设备",
"总包生产线"
],
"type": "string",
"description": "需求内容。"
},
"title": {
"type": "string",
"description": "方案标题(不填自动生成)。"
},
"project": {
"type": "string",
"description": "项目名称。"
},
"ore_type": {
"type": "string",
"description": "矿石种类。"
},
"form_text": {
"type": "string",
"description": "客户需求表的文字内容(可整段粘贴,工具自动抽取字段)。"
},
"line_type": {
"enum": [
"砂石骨料",
"金属矿山"
],
"type": "string",
"description": "产线类型。"
},
"cost_model": {
"enum": [
"NH200",
"NH300",
"NH400",
"NH600",
"NH700",
"NH860",
"NH865",
"NH890",
"NH895",
"NS200",
"NS300",
"NS400",
"NS600"
],
"type": "string",
"description": "用于投资估算的机型(不填则第 10 节留空)。"
},
"cost_units": {
"type": "integer",
"description": "投资估算台数。"
},
"product_mm": {
"type": "number",
"description": "成品粒度要求(mm 以下)。"
},
"client_name": {
"type": "string",
"description": "客户名称。"
},
"max_feed_mm": {
"type": "number",
"description": "原矿最大给料粒度 mm。"
},
"salesperson": {
"type": "string",
"description": "业务员。"
},
"belt_sealing": {
"type": "string",
"description": "皮带机密封形式。"
},
"capacity_tph": {
"type": "number",
"description": "客户要求的成品产量 t/h(必填)。"
},
"moisture_pct": {
"type": "number",
"description": "原矿含水率 %。"
},
"storage_type": {
"enum": [
"地仓",
"筒仓",
"堆棚"
],
"type": "string",
"description": "储料形式。"
},
"days_per_year": {
"type": "integer",
"description": "每年工作天数。"
},
"hours_per_day": {
"type": "integer",
"description": "每天工作小时。"
},
"product_specs": {
"type": "array",
"items": {
"type": "string"
},
"description": "成品骨料规格清单。"
},
"hours_per_year": {
"type": "integer",
"description": "年运行小时数(不填则按工作制推算)。"
},
"dust_limit_mgm3": {
"type": "number",
"description": "环保要求 mg/m³。"
},
"total_reserve_t": {
"type": "number",
"description": "矿山总储量 吨。"
},
"liner_life_hours": {
"type": "number",
"description": "衬板寿命 h(用于衬板吨成本)。"
},
"project_location": {
"type": "string",
"description": "项目地点。"
},
"electrical_origin": {
"enum": [
"国产",
"进口"
],
"type": "string",
"description": "电气元件及软启动。"
},
"electricity_price": {
"type": "number",
"description": "电价 元/kWh。"
},
"production_method": {
"enum": [
"干法",
"湿法"
],
"type": "string",
"description": "生产方式。"
},
"liner_cost_per_set": {
"type": "number",
"description": "单套衬板价格 元/套。"
},
"other_requirements": {
"type": "string",
"description": "客户其他需求(原样写入方案)。"
},
"storage_capacity_t": {
"type": "number",
"description": "储料仓容 吨。"
},
"unit_price_wan_cny": {
"type": "number",
"description": "实际商务单价 万元/台。"
},
"compressive_strength_mpa": {
"type": "number",
"description": "抗压强度 MPa。"
}
},
"additionalProperties": false
}| client_name |
| string |
| 客户名称。 |
| max_feed_mm | number | 原矿最大给料粒度 mm。 |
| salesperson | string | 业务员。 |
| belt_sealing | string | 皮带机密封形式(通廊整体密封/胶带机一体化廊道)。 |
| capacity_tph* | number | 客户要求的成品产量 t/h(必填)。若表里已填,请从表中抽取后填入此处。 |
| moisture_pct | number | 原矿含水率 %。 |
| storage_type | string | 储料形式。 |
| chemical_note | string | 化学成分 CaO/SiO2/MgO(骨料)。 |
| days_per_year | integer | 每年工作天数。 |
| hardness_note | string | 矿石硬度 / 压碎值备注。 |
| hours_per_day | integer | 每天工作小时(8/12/16/20)。 |
| product_specs | array | 成品骨料规格清单,如 ["0-5mm","5-10mm","10-20mm","20-31.5mm"]。 |
| shaping_needed | boolean | 是否需要整形。 |
| dust_limit_mgm3 | number | 环保要求 mg/m³(10/20/30)。 |
| total_reserve_t | number | 矿山总储量 吨。 |
| project_location | string | 项目地点。 |
| soil_content_pct | number | 原矿含土量 %。 |
| bulk_density_t_m3 | number | 堆密度 t/m³。 |
| electrical_origin | string | 电气元件及软启动。 |
| production_method | string | 生产方式。 |
| size_distribution | object |
| other_requirements | string | 客户其他需求(原样回显)。 |
| storage_capacity_t | number | 储料仓容 吨。 |
| soil_removal_needed | boolean | 是否需要除土。 |
| design_qualification | string | 设计资质/图审要求。 |
| sand_fineness_modulus | number | 机制砂细度模数 Mx。 |
| compressive_strength_mpa | number | 矿石抗压强度 MPa。 |
{
"type": "object",
"required": [
"capacity_tph"
],
"properties": {
"date": {
"type": "string",
"description": "日期。"
},
"scope": {
"enum": [
"主机设备",
"总包生产线"
],
"type": "string",
"description": "需求内容。"
},
"ore_use": {
"type": "string",
"description": "产品主要用途(建筑骨料/高钙石/水泥原料/机制砂)。"
},
"ore_type": {
"type": "string",
"description": "矿石种类(花岗岩/玄武岩/石灰石/铁矿石…)。"
},
"belt_type": {
"enum": [
"TD75",
"DTII",
"满足使用"
],
"type": "string",
"description": "皮带机选型。"
},
"form_text": {
"type": "string",
"description": "客户需求表的文字内容(Word 转文本或直接粘贴)。工具会自动抽取最大给料粒度、产量、含土量、含水率、抗压强度、成品粒度、工作制等数值字段。"
},
"line_type": {
"enum": [
"砂石骨料",
"金属矿山"
],
"type": "string",
"description": "产线类型。"
},
"grade_note": {
"type": "string",
"description": "矿石品位 / 抛废率(金属矿山)。"
},
"ore_source": {
"enum": [
"自有矿山",
"外购原材料"
],
"type": "string",
"description": "矿石来源。"
},
"product_mm": {
"type": "number",
"description": "成品粒度要求(mm 以下)。"
},
"soil_level": {
"enum": [
"含土较少",
"含土较多",
"含土较多且为粘性土质"
],
"type": "string",
"description": "含土程度。"
},
"client_name": {
"type": "string",
"description": "客户名称。"
},
"max_feed_mm": {
"type": "number",
"description": "原矿最大给料粒度 mm。"
},
"salesperson": {
"type": "string",
"description": "业务员。"
},
"belt_sealing": {
"type": "string",
"description": "皮带机密封形式(通廊整体密封/胶带机一体化廊道)。"
},
"capacity_tph": {
"type": "number",
"description": "客户要求的成品产量 t/h(必填)。若表里已填,请从表中抽取后填入此处。"
},
"moisture_pct": {
"type": "number",
"description": "原矿含水率 %。"
},
"storage_type": {
"enum": [
"地仓",
"筒仓",
"堆棚"
],
"type": "string",
"description": "储料形式。"
},
"chemical_note": {
"type": "string",
"description": "化学成分 CaO/SiO2/MgO(骨料)。"
},
"days_per_year": {
"type": "integer",
"description": "每年工作天数。"
},
"hardness_note": {
"type": "string",
"description": "矿石硬度 / 压碎值备注。"
},
"hours_per_day": {
"type": "integer",
"description": "每天工作小时(8/12/16/20)。"
},
"product_specs": {
"type": "array",
"items": {
"type": "string"
},
"description": "成品骨料规格清单,如 [\"0-5mm\",\"5-10mm\",\"10-20mm\",\"20-31.5mm\"]。"
},
"shaping_needed": {
"type": "boolean",
"description": "是否需要整形。"
},
"dust_limit_mgm3": {
"type": "number",
"description": "环保要求 mg/m³(10/20/30)。"
},
"total_reserve_t": {
"type": "number",
"description": "矿山总储量 吨。"
},
"project_location": {
"type": "string",
"description": "项目地点。"
},
"soil_content_pct": {
"type": "number",
"description": "原矿含土量 %。"
},
"bulk_density_t_m3": {
"type": "number",
"description": "堆密度 t/m³。"
},
"electrical_origin": {
"enum": [
"国产",
"进口"
],
"type": "string",
"description": "电气元件及软启动。"
},
"production_method": {
"enum": [
"干法",
"湿法"
],
"type": "string",
"description": "生产方式。"
},
"size_distribution": {
"type": "object",
"properties": {
"p0_60": {
"type": "number",
"description": "0-60mm 占比 %。"
},
"p60_100": {
"type": "number",
"description": "60-100mm 占比 %。"
},
"p_gt300": {
"type": "number",
"description": "大于 300mm 占比 %。"
},
"p100_300": {
"type": "number",
"description": "100-300mm 占比 %。"
}
},
"additionalProperties": false
},
"other_requirements": {
"type": "string",
"description": "客户其他需求(原样回显)。"
},
"storage_capacity_t": {
"type": "number",
"description": "储料仓容 吨。"
},
"soil_removal_needed": {
"type": "boolean",
"description": "是否需要除土。"
},
"design_qualification": {
"type": "string",
"description": "设计资质/图审要求。"
},
"sand_fineness_modulus": {
"type": "number",
"description": "机制砂细度模数 Mx。"
},
"compressive_strength_mpa": {
"type": "number",
"description": "矿石抗压强度 MPa。"
}
},
"additionalProperties": false
}| include_wear |
| boolean |
| 是否纳入衬板磨损设计(默认 false)。 |
| closed_circuit | boolean | 是否闭路(默认 true)。 |
| hours_per_year | integer | 年运行小时数。 |
| electricity_price | number | 电价 元/kWh。 |
| target_product_mm | number | 最终产品粒度 mm。 |
| cumulative_retained | array | 长度 8 的累积筛余百分比数组,用于 MCFM 诊断(可选)。 |
{
"type": "object",
"required": [
"target_tph"
],
"properties": {
"ore": {
"type": "string",
"description": "矿石名称/硬度备注。"
},
"stage": {
"enum": [
"auto",
"中碎",
"细碎",
"超细碎"
],
"type": "string",
"default": "auto",
"description": "圆锥破工序段。"
},
"title": {
"type": "string",
"description": "报告标题。"
},
"project": {
"type": "string",
"description": "项目名称。"
},
"cost_tph": {
"type": "number",
"description": "成本估算对应处理量 t/h。"
},
"cost_model": {
"enum": [
"NH200",
"NH300",
"NH400",
"NH600",
"NH700",
"NH860",
"NH865",
"NH890",
"NH895",
"NS200",
"NS300",
"NS400",
"NS600"
],
"type": "string",
"description": "成本估算所用机型。"
},
"cost_units": {
"type": "integer",
"description": "成本估算台数。"
},
"target_tph": {
"type": "number",
"description": "目标处理量 t/h(必填,用于生产线配置与选型)。"
},
"wear_rates": {
"type": "array",
"items": {
"type": "number"
},
"description": "各截面实测磨损速率(可选)。"
},
"max_feed_mm": {
"type": "number",
"description": "原矿/本段最大给料粒度 mm。"
},
"include_cost": {
"type": "boolean",
"default": true,
"description": "是否纳入成本估算(默认 true)。"
},
"include_wear": {
"type": "boolean",
"default": false,
"description": "是否纳入衬板磨损设计(默认 false)。"
},
"closed_circuit": {
"type": "boolean",
"default": true,
"description": "是否闭路(默认 true)。"
},
"hours_per_year": {
"type": "integer",
"description": "年运行小时数。"
},
"electricity_price": {
"type": "number",
"description": "电价 元/kWh。"
},
"target_product_mm": {
"type": "number",
"description": "最终产品粒度 mm。"
},
"cumulative_retained": {
"type": "array",
"items": {
"type": "number"
},
"description": "长度 8 的累积筛余百分比数组,用于 MCFM 诊断(可选)。"
}
},
"additionalProperties": false
}