Input schema (JSON)
{
"type": "object",
"$schema": "http://json-schema.org/draft-07/schema#",
"required": [
"items"
],
"properties": {
"email": {
"type": "string",
"format": "email",
"pattern": "^(?:[A-Za-z0-9_'+\\-]+\\.)*[A-Za-z0-9_'+\\-]*[A-Za-z0-9_+-]@(?:[A-Za-z0-9][A-Za-z0-9\\-]*\\.)+[A-Za-z]{2,}$",
"maxLength": 254,
"description": "Buyer's email, only if they gave it: prefills checkout; the receipt, invoice and tracking go there."
},
"items": {
"type": "array",
"items": {
"type": "object",
"properties": {
"end_a": {
"enum": [
"straight",
"ra-up",
"ra-down"
],
"type": "string",
"description": "End A termination. \"ra-up\"/\"ra-down\" bend the power wires 90° up/down as seen from the wire side. End A always has a plug. Default \"straight\"."
},
"end_b": {
"enum": [
"straight",
"ra-up",
"ra-down",
"unterminated"
],
"type": "string",
"description": "End B termination. \"unterminated\" makes a pigtail: no plug, wires stripped 6 mm and tinned. Default \"ra-down\"."
},
"colors": {
"type": "object",
"properties": {
"signal_1": {
"enum": [
"green",
"yellow"
],
"type": "string",
"description": "Signal 1 (pin 1). Default green. Signal-pair connectors only."
},
"signal_2": {
"enum": [
"green",
"yellow"
],
"type": "string",
"description": "Signal 2 (pin 2). Default yellow. Signal-pair connectors only."
},
"power_neg": {
"enum": [
"red",
"black"
],
"type": "string",
"description": "Power − wire. Default black."
},
"power_pos": {
"enum": [
"red",
"black"
],
"type": "string",
"description": "Power + wire. Default red."
}
},
"description": "Wire colors. Power wires are red or black; signal wires green or yellow. Omitted wires keep their default color.",
"additionalProperties": false
},
"design": {
"type": "string",
"maxLength": 2000,
"description": "Optional starting point: a complete design code or configurator URL from a previous quote (e.g. \"https://acornharness.com/?k=22&l=350&g=16&a=st&b=ra-d&c=red.black.green.yellow&t=1&q=1\"). The other fields override it."
},
"twisted": {
"type": "boolean",
"description": "Twist the signal pair (default true). \"xt30-22\" and \"xt30-gh\" only."
},
"end_b_gh": {
"type": "boolean",
"description": "\"xt30-22\" only: put end B's signal pair on its own JST GH 1.25 mm 2-pin plug, with end B's power on a 2-pin XT30 (or tinned leads if end_b is \"unterminated\"). Default false."
},
"quantity": {
"type": "integer",
"maximum": 5000,
"minimum": 1,
"description": "How many of this design, 1–5000. Default 1."
},
"connector": {
"enum": [
"xt30",
"xt30-22",
"xt30-gh"
],
"type": "string",
"description": "Connector type: \"xt30\" = XT30 (power only, 2 pins); \"xt30-22\" = XT30(2+2) (power + 2 signal pins); \"xt30-gh\" = XT30 + JST GH (power + signal on gh). Default \"xt30-22\"."
},
"length_mm": {
"type": "number",
"maximum": 3000,
"minimum": 30,
"description": "Wire length in mm, 30–3000, rounded to the nearest 5 mm. Wire only, measured between the rear faces of the plugs (to the wire tips on a pigtail). Default 350."
},
"power_gauge": {
"enum": [
14,
16,
18
],
"type": "number",
"description": "Power wire gauge in AWG: 14, 16, 18. Default 16. Signal wires are fixed at 24 AWG (30 AWG with any JST GH plug)."
},
"swap_signals": {
"type": "boolean",
"description": "Cross the signal pair: end A pin 1 to end B pin 2 and 2 to 1, e.g. to swap CAN H/L. \"xt30-22\" and \"xt30-gh\" only, and end B needs signal pins (a plug, or end_b_gh). Default false."
}
},
"additionalProperties": false
},
"maxItems": 40,
"minItems": 1,
"description": "1–40 wire harness designs. Volume discounts count every harness across all items."
},
"reference": {
"type": "string",
"maxLength": 200,
"minLength": 1,
"description": "Buyer's PO number or note, echoed back on the order."
},
"idempotency_key": {
"type": "string",
"maxLength": 200,
"minLength": 1,
"description": "Any unique string. Retrying with the same key and the same items returns the same order instead of a second one."
}
}
}