Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.
Maintain this server? Claim it
Call this server's tools from your browser. Nothing to install.
Requests go through mcptry because browsers can't call most MCP servers directly. Header values are sent to the server for that request only and are never stored or logged.
Tool list from our last check. Connect live to refresh it.
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
The grade code to cross-reference, e.g. "GC4325" or "KC5010"
Optional: the grade's manufacturer, to disambiguate codes used by several makers
This tool isn't marked read-only, so it may change something on the server or in an account you connected.
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
| Argument | Type | Description |
|---|---|---|
| brand | string | Optional: the grade's manufacturer, to disambiguate codes used by several makers |
| grade* | string | The grade code to cross-reference, e.g. "GC4325" or "KC5010" |
{
"type": "object",
"required": [
"grade"
],
"properties": {
"brand": {
"type": "string",
"description": "Optional: the grade's manufacturer, to disambiguate codes used by several makers"
},
"grade": {
"type": "string",
"description": "The grade code to cross-reference, e.g. \"GC4325\" or \"KC5010\""
}
}
}Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
| Argument | Type | Description |
|---|---|---|
| designation* | string | Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718) |
{
"type": "object",
"required": [
"designation"
],
"properties": {
"designation": {
"type": "string",
"description": "Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718)"
}
}
}Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.
| Argument | Type | Description |
|---|---|---|
| iso_group* | string | ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys. |
{
"type": "object",
"required": [
"iso_group"
],
"properties": {
"iso_group": {
"enum": [
"P",
"M",
"K",
"N",
"S_TI",
"S_NI",
"H"
],
"type": "string",
"description": "ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys."
}
}
}